Two bolts pull evenly from both sides — no cocking on large diameters.
Above roughly 100 mm, a single bolt tends to pull the band to one side. The double-bolt design closes from both directions, so the gap stays even and the seal is uniform around the pipe.
Supplied with M8 or M10 bolts in 304 stainless, with or without liner, from 50 mm to 400 mm.
Low MOQ accepted · Samples welcome · Free quotation within 24 hours
| Material | Stainless Steel 201 / 304 / 316, Carbon Steel Zinc Plated |
|---|---|
| Band Width | 25 mm / 30 mm |
| Diameter Range | 50 mm – 400 mm |
| Bolt Size | M8 / M10 × 2 |
| Standard | DIN 3017 / SAE J1508 / BS 4598 |
| Finish | Natural / Zinc Plated / Black |
| Application | Automotive, Industrial, Marine, Agriculture |
Values are typical for the standard range. Band width, thickness, diameter, material grade and marking can all be changed to your drawing.
Large-diameter pipe, HVAC ducting, marine exhaust.
Send the diameter, band width and material you need. Custom clamps are quoted within 24 hours, samples in 7 days.
